Home » Products » Commercial Slope-Top Convector – ST Series

Commercial Slope-Top Convector – ST Series

  • IDEAL SPACES| (STANDARD) Offices; Corridors; Lobbies; Maintenance Rooms; Stairwells; Other Similar Spaces (NEMA 4x) Food Processing Areas; Dairies; Breweries; Locker Rooms; Stadium Dugouts; Other Areas Subject To High Pressure Hosing and/or Wet Conditions
  • COLORS | White, Beige, Aluminum, Bronze, Black, Charcoal Gray&Stainless Steel
  • Custom Colors Available
  • DIMENSIONS | See specifications
  • NEMA 4X model consists of stainless steel design rated for washdown and corrosive environments
  • Designed to mount on wall at sill height (or lower) and can be positioned directly on floor. End of unit can be positioned against adjacent sidewall if desired
  • Front cover fabricated from 16-gauge steel; back cover is constructed of 18-gauge steel
  • Thermal limit switch with linear type (full length) sensing bulb provides constant protection against overheating from any cause. Switch will automatically reset when normal operating temperatures are restored
  • Elements are long-life metal sheath type, anchored to allow for quiet expansion and contraction
  • Baked enamel finishes that are compatible with all interior decors
  • Attractive 45 sloped top discourages use of heater as a shelf or a stepstool
  • Units can be mounted from wall-to-wall or as discrete units in standard lengths of 28 in. to 10 ft.
  • Optional built-in controls include: thermostat; disconnect switch; transformer relay; and power relay (see specifications)
  • Accessories include complete line of matching splice sections, inside and outside corners, and blank sections
  • Pre-wired and designed for either right- or left-hand entry with connection of supply wiring from bottom, rear or end, as well multiple wiring of adjacent heaters from one entry point
  • All internal parts are accessible by removing cover for easy service access

Additional information

CATALOG NUMBER LENGTH NOMINAL WATTS PER FT. TOTAL HEAT CAPACITY WATTS 120V AMPS 208V AMPS 240V AMPS 277V AMPS 347V AMPS 600V AMPS SHIP WT.(lbs.)
125 250 2.1 1.2 1 0.9
ST02 28 188 375 3.1 1.8 1.6 1.4 12 lbs.
250 500 4.2 2.4 2.1 1.8 1.4
125 375 3.1 1.8 1.6 1.4 1.1
ST03 36 188 546 4.7 2.7 2.4 2 1.6 15 lbs.
250 750 6.2 3.6 3.1 2.7 2.2
125 500 4.2 2.4 2.1 1.8 1.4
ST04 48 188 750 6.2 3.6 3.1 2.7 2.2 1.3 19 lbs.
250 1000 8.3 4.8 4.2 3.6 2.9 1.7
125 625 5.2 3 2.6 2.3 1.8 1
ST05 60 188 940 7.8 4.5 3.9 3.4 2.7 1.6 24 lbs.
250 1250 10.4 6 5.3 4.5 3.6 2.1
125 750 6.2 3.6 3.1 2.7 2.1 1.3
ST06 72 188 1125 9.4 5.4 4.7 4.1 3.2 1.9 26 lbs.
250 1500 12.5 7.2 6.3 5.4 4.3 2.5
125 1000 4.8 4.2 3.6 2.9 1.7
ST08 96 188 1500 7.2 6.3 5.4 4.3 2.5 37 lbs.
250 2000 9.6 8.3 7.2 5.8 3.3
125 1250 6 5.2 4.5 3.6 2.1
ST10 120 188 1875 9 7.8 6.8 5.4 3.1 45 lbs.
250 2500 12 10.4 9 7.2 4.2

This product is a custom Made-To-Order (MTO) product. It is not covered by the Marley Engineered Products Merchandise Return Policy and is non-cancellable, exchangeable, or returnable.

Product Manuals and Literature